Marine Plywood Michigan How Do I Wet Sand A Fiber Glass And Marine Plywood Sail Boat Hull?
How do I wet sand a fiber glass and marine plywood sail boat hull? - marine plywood michigan
I need to wet body part repayment MRIN then with a varnish on them. How do I get the sideline in the water? I will be a heavy use of color on the keel and the area under water. Are there any special anti Addtive barnacles?
|
3 comments:
I hope to put the primer on my yacht. The water line is clearly visible from the agar-old forests. Since the previous owner left in the sea I painted was a breeze to use tape or line to mark the ground before I sand. Wet / dry sandpaper, the man with the black, should be washed in water, when used. Who holds the sand are filled with debris from grinding. Normally you start with a few grains of assembly, then use a higher number on the number of finer grains at the end. The person who says he can 't sand fiberglass is probably referring to the fact that this is what makes sanding the hull, the layer of frost. Each rule finishing bottom, suitable for all crusty creatures. Bob spes vitae Anchora
Did you wet sand fiberglass. whast and wet sanding is not necessary for civilian paint.and what kind of paint you use (punch-Grip,,, gel coat, etc) and get a straight line and is prepared depending on the type the primer for the substance use of boat you have, and you have (color from head to head hehe) and the background of the painting is to protect something against growth, and there is a lot more space to your question here, it You are trying, if I can put a link http://www.boatdesign.net/forums/showthr ...
Check with your paint navy. There are additives that is mixed with the ANC color. You water sand with 600 wet or dry and soapy water with some sand. I use epoxy primer, then painted marine grade
Post a Comment